Earthquake 26750 Manuel d'utilisateur télécharger pdf (Page 10)

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-510

Operator's Manual

VECTOR™ Compact Tiller

HIGHEST

HANDLEBAR

POSITION

MIDDLE

HANDLEBAR

POSITION

LOWER

HANDLEBAR

POSITION

FIGURE 3

IMPORTANT

THE RIGHT AND LEFT SIDES

OF YOUR ROTOTILLER ARE

DETERMINED FROM THE

OPERATING POSITION AS

YOU FACE THE DIRECTION OF

FORWARD TRAVEL.

L R

M8X25 BOLTS

M8 NUTS

M8 WASHERS

LOWER

HANDLEBAR

LOOP

FIGURE 1

UNPACKING AND ASSEMBLY

Unpacking and Assembling Your Tiller

Tools Required for Assembly

• 10 mm Wrench

• 12 mm Wrench

• (or, two adjustable crescent wrenches)

1. Open top of carton and remove handlebar assembly.

Parts bag for VECTOR tiller contains:

• 2- Bolts M8 x 1.25 x 20 Hex Head

• 6- Bolts M8 x 1.25 x 25 Hex Head

• 6- Washers M8 8.4mm x 24mm x 2.2mm

• 6- Nuts M8 x 1.25

• 2- Middle Handlebar Straps

• 2- Hand Knobs

• 6- Bolts M6 x 1.0 x 12

• 6- Nylock Nuts M6 x 1.0

3. Remove machine from carton

4. Assemble the upper handlebar onto the lower handlebar

loop as follows: SEE FIGURES 1 AND 2

a. Use the two (2) middle handlebar straps to connect

the upper handlebar to the lower handlebar loop.

b. Install the M8 x 25 bolts through the six lower bolt

holes from the outside in.

c. Install six (6) washers and tighten with six (6) M8 nuts

on the six (6) bolts.

d. Tighten the two (2) M8 hand knobs on the two (2) M8

x 20 bolts in the upper most hole on each side of the

handlebar. .

NOTE: The two (2) upper bolts and hand knobs can be

used in one of three hole positions for handlebar

height adjustment. SEE FIGURE 3

DO NOT LIFT THE ROTOTILLER FROM THE CARTON.

ROTOTILLER IS HEAVY AND CAN CAUSE INJURY. CUT

BOX AWAY FROM ROTOTILLER AND REMOVE BOX.

WARNING

UPPER

HANDLEBAR

M8-20 BOLTS

M8X25

BOLTS

LOWER

HANDLEBAR

LOOP

HANDLEBAR

STRAP

HAND

KNOB

M8 NUTS &

WASHERS

FIGURE 2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Earthquake 26750 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Earthquake 26750