Earthquake 9060300 Manuel d'utilisateur télécharger pdf (Page 18)

Operator's Manual

Viper® 196cc 4-Cycle Engine

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-518

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE CAUSE REMEDY/ACTION

Engine will not start 1. Power switch o 1. Flip switch to ON position

2. Fuel valve o 2. Check fuel valve is on

3. Spark plug wire disconnected 3. Connect spark plug wire to spark plug

4. Out of fuel 4. Refuel

5. Spark plug wet, faulty or improperly

gapped

5. Clean, replace or gap spark plug

Electric Start 5. Battery discharged 5. Recharge battery

Engine runs rough, oods during op-

eration

1. Dirty air lter 1. Clean or replace air lter

2. Choke partially engaged 2. Turn o choke

3. Carburetor out of adjustment 3. Call factory

Engine is hard to start 1. Stale fuel 1. Drain old fuel and replace with fresh.

Use fuel stabilizer

2. Spark plug wire loose 2. Make sure spark wire is securely attached

to spark plug

3. Dirty carburetor 3. Clean carburetor, use fuel stabilizer, new

fuel can

Engine misses or lacks power 1. Clogged fuel tank or fuel lter 1. Remove and clean

2. Clogged air lter 2. Clean or replace

3. Improper carburetor adjustment 3. Call factory

4. Spark plug dirty, improper gap, or

wrong type

4. Replace spark plug and adjust gap to

.030”

Engine runs, then quits 1. Fuel cap not venting 1. Replace fuel cap

Contact a service provider if above remedies fail.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Earthquake 9060300 Manuel d'utilisateur Page 18