search

EarthQuake 3300V Manuel d'instructions Page 44

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 76
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 43
41
Chapter
ChapterChapter
Chapter4
44
4.
. .
. Inverter Operation
Inverter OperationInverter Operation
Inverter Operation
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MANN5000 INSTRUCTION MAN
N5000 INSTRUCTION MAN
UAL
UALUAL
UAL
4.3.10 Group A Screen 2
‘Group A Screen 2’ screen panel comes out when DOWN ( ) button in ‘Group A Screen 1’ screen
panel or UP ( ) button in ‘Group A Screen 3’ screen panel is touched. External signal source,
start/end frequency, start/end ratio, starting method, and external commanding filter are set
through this screen panel when external analog input/contacts are selected as a controller of
setting commanding frequency.
This screen panel also comes out when commanding frequency is set through external analog
input/contacts
Figure 17 Group A screen 2
When touching any button in the screen panel, 10KEY screen comes out for inputting values.
(1) External commanding channel: there are 4 external analog channels to set frequency and get
external signals. This button chooses one channel as a receiving terminal when output frequency is
set by external analog input.
(2) Start frequency: Set starting output frequency in [Hz] unit when the commanding frequency is
determined by the external analog input.
(3) End frequency: Set end output frequency in [Hz] unit when the commanding frequency is
determined by the external analog input.
(4) Start ratio: Set the ratio of starting output frequency when the commanding frequency is
determined by the external analog input.
(5) End ratio: Set the ratio of the end of output frequency when the commanding frequency is
determined by the external analog input.
(6) Starting method selection: selects starting method when the commanding frequency is
determined by the external analog input.
0: [Displays ‘Code’] generates ‘starting frequency’ output when output frequency is within
0 ~ start ratio.
1: [Displays ‘0Hz’] generates ‘0Hz’ output when output frequency is within 0~start ratio.
Vue de la page 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Commentaires sur ces manuels

Pas de commentaire
Produits connexes et manuels pour Outils de jardin EarthQuake 3300V
Outils de jardin EarthQuake 3300V Instructions d'exploitation   (28 pages)
  • Becker ESBIT Win PI Manufacturing EVA STAMPAGGI
  • LG Réfrigérateurs-congélateurs côte à côte One For All Non Polaroid Copieurs EINHELL Tondeuses à gazon Shure Antennes de réseau
  • Kenroy Home 32260CLR Indesit IFW 3534 H IX Panasonic SCPT470 Samsung 173VT
  • Samsung NS190 Manuel de l'utilisateur Sony CDX-R30M Manuel de l'utilisateur Martin-audio Blackline F12+ Manuel de l'utilisateur LG GR-T382SV Manuel de l'utilisateur Acer H213H Manuel de l'utilisateur