EarthQuake CS4518B Manuel de l'opérateur télécharger pdf (Page 13)

Page 13

A standard saw unit package contains the items as shown below.：

(1) Power unit

(2) Guide bar

(3) Saw chain

(4) Plug wrench

(5) Screwdriver for carburetor adjustment

Open the box and install the guide bar and the

saw chain on the power unit as follows.

WARNING

The saw chain has very sharp edges. Use protective gloves for safety.

1. Pull the guard towards the front handle to check that the chain

brake is not on.

2. Loosen a nut and remove the chain cover. Then, remove

bar spacer used for shipping (see photo A).

3. Wrap the chain to the sprocket and, while ﬁtting the saw chain

around the guide bar, mount the guide bar to the power unit.

Adjust the position of chain tensioner nut.

(7) Hole

(8) Chain tensioner nut.

(9) Clutch cover

Installing Guide Bar / Chain

photo A:

bar spacer to remove

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

Pas de commentaire

EarthQuake CS4518B Manuel de l'opérateur Page 13