EarthQuake CRT series Manuel de l'opérateur télécharger pdf (Page 14)

Operator’s Manual

Front Tine Tiller 3365 Series

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST

STORAGE

PREPARE FOR STORAGE

Follow the steps below to prepare your tiller for storage. Read your

engine manual for detailed instructions on preparing the engine for

storage.

1. Protect wheels and axles from rust:

- Coat the axles lightly with axle grease.

2. Drain fuel system completely following engine manufacturer’s

instructions or add fuel stabilizer to prevent fuel from gumming up

during extended storage period.

3. While engine is still warm, drain the oil from the engine. Rell with

fresh oil of the recommended grade.

4. Clean external surfaces, engine and cooling fan.

5. Removesparkplug;pouroneounceofSAE30oilintosparkplug

hole.

6. Plug hole and pull starter cord slowly to distribute oil evenly in

cylinder head area.

7. Reinstall spark plug.

8. Transport unit to a suitable storage location. If you have chosen to

use a fuel stabilizer and have not drained the fuel system, follow all

safety instructions storage precautions in this manual to prevent the

possibility of re from the ignition of gasoline fumes. Remember,

gasoline fumes can travel to distant sources of ignition and ignite,

causing risk of explosion and re.

9. If there is any possibility of unauthorized use or tampering, remove

the spark plug and store it in a safe place before storing the rototiller

unit. Be sure to plug the spark plug hole to prevent foreign material

from entering.

DO NOT STORE TILLER IN AN UNVENTILATED AREA WHERE

FUEL FUMES MAY REACH FLAME, SPARKS, PILOT LIGHTS

OR AN IGNITED OBJECT. DRAIN FUEL OUTDOORS AWAY

FROM ANY IGNITION SOURCES. USE ONLY APPROVED FUEL

CONTAINERS.

WARNING

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

EarthQuake CRT series Manuel de l'opérateur Page 14