search

EarthQuake CRT series Manuel de l'opérateur Page 8

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • DEPANNAGE
    •
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 7
Operator’s Manual
Front Tine Tiller 3365 Series
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST
8
CONTROLS
DRIVE SAFETY CONTROL LEVER
Engages tines into forward; releasing returns machine to neutral.
Pulling down on the drive safety control lever engages the tines.
Releasing the drive safety control lever disengages the tines to a neutral
position.
BELT TENSION ADJUSTMENT
Proper belt tension is critical to good performance. After 30 minutes
of operation, all cables may have to be adjusted due to initial stretch.
Thereafter, check tension after every two hours of operation.
To increase belt tension:
1. Loosen upper jam nut. Turn nut up cable in 1/8” increments.
2. Tighten lower jam nut.
3. Check adjustment.
This procedure can be repeated until conduit adjustment bolts have
no more adjustment left. If no more adjustment can be made, belt
may have to be replaced.
DEPTH REGULATOR LEVER
Tilling depth is controlled by the height of the depth regulator lever.
To adjust tilling depth:
1. Remove detent pin.
2. Raise the depth regulator lever to position tines at chosen tilling
depth.
3. Align hole in depth regulator lever with hole in depth regulator
bracket and replace detent pin.
ENGINE SHOULD BE OFF BEFORE ADJUSTING ANY CONTROLS.
DO NOT ADJUST TILLING DEPTH UNLESS DRIVE SAFETY
CONTROL LEVER IS RELEASED TO THE NEUTRAL POSITION.
WARNING
CAUTION
THIS INFORMATION IS PROVIDED HERE ONLY TO INTRODUCE
THE CONTROLS. DO NOT START THE ENGINE AT THIS TIME.
STARTING AND OPERATING INSTRUCTIONS ARE GIVEN ON
PAGE 10. PLEASE READ THIS SECTION AND ALL OPERATING
AND SAFETY INSTRUCTIONS BEFORE STARTING YOUR TILLER.
• AS A SAFETY PRECAUTION, THE DRIVE SAFETY CONTROL
LEVER WILL NOT LOCK IN THE FORWARD POSITION.
• TO STOP THE WHEELS AND TINES AT ANY TIME, RELEASE
THE DRIVE SAFETY CONTROL LEVER.
drive safety control lever disengaged
SRT CRT
forward cable
upper jam nut
lower jam nut
1/4” stretch
Models 3365B and 3365CE handlebar
Models 3365PS and 3365PSCE
handlebar
drive safety control lever disengaged
forward cable
upper jam nut
lower jam nut
1/4” stretch
Vue de la page 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Commentaires sur ces manuels

Pas de commentaire
Produits connexes et manuels pour Mini-faucheuses EarthQuake CRT series
Mini-faucheuses EarthQuake MC43 Manuel de l'opérateur   (32 pages)
Mini-faucheuses EarthQuake MC43 Manuel d'utilisateur   (20 pages)
Mini-faucheuses EarthQuake 14318 (CE) Manuel de l'opérateur   (24 pages)
Mini-faucheuses EarthQuake CRT series Manuel de l'opérateur   (32 pages)
  • Prism Vortech Engineering Allen Soniclean Jammin Pro
  • HP Modules de réception GPS Jotul Poêles Infinity Amplificateurs audio pour voitures Jet Tools Scies circulaires Ativa Haut-parleurs d'amarrage
  • Iogear GBP301 Philips MCM3050/12 Ryobi RY15519 McIntosh MR66
  • Radio-shack 63-3013 Manuel de l'utilisateur Lg W2242T-SF Manuel de l'utilisateur Sony HDR-AS20 Guide de l'utilisateur Canon EP27 Manuel de l'utilisateur Smeg S7147LS2P Manuel de l'utilisateur